Quick Change Angle Beam Transducers

Quick Change Angle Beam Transducers are recommended for inspecting limited access areas with curved surfaces, or for reducing the approach distance to the test areas.  Transducer frequency is distinguished by color cap.  The wedges are designed to get optimum sensitivity, high resolution, and high signal-to-noise ratio.

Element Size 450 600 700  900
(Inch) A B C A B C A B C A B C
0.5 1.10 0.75 0.63 1.34 0.75 0.71 1.50 0.75 0.79 1.50 0.75  0.87
0.375 1.02 0.63 0.59 1.18 0.63 0.63 1.30 0.63 0.71 1.30 0.63 0.75
0.25 0.87 0.50 0.51 1.02 0.50 0.59 1.14 0.50 0.63 1.18 0.50 0.63
 
Frequency Element Size Part Numbers
(MHz) (Inch) (mm)
1.0 0.5 13 AQ1-05
0.375 10 AQ1-03
2.25 0.5 13 AQ2-05
0.375 10 AQ2-03
0.25 6 AQ2-02
3.5 0.5 13 AQ3-05
0.375 10 AQ3-03
0.25 6 AQ3-02
5.0 0.5 13 AQ5-05
0.375 10 AQ5-03
0.25 6 AQ5-02
10.0 0.5 13 AQ10-05
0.375 10 AQ10-03
0.25 6 AQ10-02

Quick Change Angle Beam Wedges

 

Element Size Refracted Angle & Part Numbers
(Inch) (mm) 450 600 700 900
0.5 13 AQW05-45 AQW05-60 AQW05-70 AQW05-90
0.375 10 AQW03-45 AQW03-60 AQW03-70 AQW03-90
0.25 6 AQW02-45 AQW02-60 AQW02-70 AQW02-90