Fingertip Contact Transducers

Fingertip Contact Transducer features stainless steel knurling case and right angle microdot or lemo 00 connector. This type of transducer is known as high frequency, small element, and small case size. It can be used on difficult-to-access surfaces, and it can precisely detect the flaws of the relatively smooth surfaces.

Element Size A B
1.00 0.67" 1.23"
0.75 0.67" 0.96"
0.50 0.67" 0.72"
0.375 0.67" 0.64"
0.25 0.67" 0.49"
0.125 0.67" 0.49"
 
Frequency Element Size Part Numbers
(MHz) (Inch) (mm) G Series R Series S Series
1.0 1.00 25 FCG1-10 FCR1-10 FCS1-10
0.75 19 FCG1-07 FCR1-07 FCS1-07
0.50 13 FCG1-05 FCR1-05 FCS1-05
2.25 1.00 25 FCG2-10 FCR2-10 FCS2-10
0.75 19 FCG2-07 FCR2-07 FCS2-07
0.50 13 FCG2-05 FCR2-05 FCS2-05
0.375 10 FCG2-03 FCR2-03 FCS2-03
0.25 6 FCG2-02 FCR2-02 FCS2-02
3.5 1.00 25 FCG3-10 FCR3-10 FCS3-10
0.75 19 FCG3-07 FCR3-07 FCS3-07
0.50 13 FCG3-05 FCR3-05 FCS3-05
0.375 10 FCG3-03 FCR3-03 FCS3-03
0.25 6 FCG3-02 FCR3-02 FCS3-02
5.0 1.00 25 FCG5-10 FCR5-10 FCS5-10
0.75 19 FCG5-07 FCR5-07 FCS5-07
0.50 13 FCG5-05 FCR5-05 FCS5-05
0.375 10 FCG5-03 FCR5-03 FCS5-03
0.25 6 FCG5-02 FCR5-02 FCS5-02
0.125 3 FCG5-01 FCR5-01 FCS5-01
7.5 0.50 13 FCG7-05 FCR7-05 FCS7-05
0.375 10 FCG7-03 FCR7-03 FCS7-03
0.25 6 FCG7-02 FCR7-02 FCS7-02
10 0.50 13 FCG10-05 FCR10-05 FCS10-05
0.375 10 FCG10-03 FCR10-03 FCS10-03
0.25 6 FCG10-02 FCR10-02 FCS10-02
0.125 3 FCG10-01 FCR10-01 FCS10-01
15 0.25 6 FCG15-02 FCR15-02 FCR15-02
20 0.125 3 FCG20-01 FCR20-01 FCR20-01