CD International Technology +1-408-986-0725
cdint@cdint.com
DUNS: 948142211
CAGE Code: 4W0Q2

...shipping worldwide since 1995.

   Top » Catalog » Bulk Cable » RG196 low noise » CB-196LN-10 My Account | Cart Contents | Checkout   
Search
 
Use part number, keywords, AND, OR, or try Advanced Search
Shopping Cart more
0 items
Categories
Bulk Cable-> (61)
  RG174 (5)
  RG174 dual (5)
  RG174 flexible (5)
  RG174 low loss (5)
  RG174 low noise (5)
  RG178 (5)
  RG188 (5)
  RG188 low noise (5)
  RG196 low noise (5)
  RG316 (5)
  RG316 armored (1)
  RG316 double shielded (5)
  RG58 (5)
Connectors-> (12)
Cables-> (391500)
Bestsellers
01.Coaxial Cable, BNC to 10-32 (Microdot compatible), RG174, 6 foot, 50 ohm
02.Coaxial Cable, BNC to 10-32 (Microdot compatible), RG174, 10 foot, 50 ohm
03.Coaxial Cable, BNC to L00 (Lemo 00 compatible), RG174 dual, 6 foot, 50 ohm
04.Coaxial Cable, BNC to SMB 90 degree (right angle) plug (female contact), RG174, 3 foot, 50 ohm
05.Coaxial Cable, BNC to L00 (Lemo 00 compatible), RG174, 6 foot, 50 ohm
06.Coaxial Cable, MCX plug (male contact) to SMB plug (female contact), RG174 flexible (TPR jacket), 1 foot, 50 ohm
07.Coaxial Cable, SMA to SMA, RG174, 1 foot, 50 ohm
08.Coaxial Cable, SMA to SMB plug (female contact), RG316, 3 foot, 50 ohm
09.Connector, BNC (for RG174, RG178, RG188, RG196, RG316)
Information
Contact Us
How to Order
Bulk Coaxial Cable, RG196 low noise, 10 foot, 50 ohm
[CB-196LN-10]
$24.49
Available for order

CB-196LN-10 is a 10 foot (3.05 meter) roll of RG196 low noise 50 ohm stranded core cable. 50 ohm coax cable, connectors, and adapters are commonly used in GPS and wifi (802.11 wireless LAN) antennas, ham transceivers, and other radio frequency (RF) analog and digital signaling, microwave, radar, hi-fidelity professional audio, non-destructive testing (NDT), oil and petroleum production, ultrasonic transducers, accelerometers, strain gauges, and some professional video applications.

About Low Noise Cable

This is a "low noise" cable, with a carbon-impregnated conductive PTFE layer added around the PTFE dielectric; this layer helps to increase shielding, dissipate static charge, and reduce mechanically-generated electrical noise as the cable is flexed. This extra protection is useful for long cable runs, low-voltage signals, high-vibration environments, in applications including aerospace, automotive, NDT, strain gauges and accelerometers, and extremely high fidelity professional audio production.

Low noise cable is generally not recommended for RF use. In our own testing, we see characteristics which differ from ordinary cable, including phase delay and impedance variations with frequency. In the field, we've seen mixed results in the GHz range; low noise cables seem to provide the best results at signal frequencies in the low MHz or lower. Ultrasonic NDT, for example, uses low-noise cable with signals as high as 100 MHz, but in transient pulse trains, where phase delay is less critical. The results you get will depend on the application, and as always you will want to do your own testing before ordering large quantities.

RG196 low noise Specifications

The following are nominal values; if you have exact requirements that need to be met for a given application, please contact us.

Impedance50 ohms
Capacitance107.3 pF/meter (32.7 pF/foot)
Minimum Operating Temperature-55 C (-67.0 F)
Maximum Operating Temperature250 C (482.0 F)
Jacket Diameter1.9 mm
Jacket MaterialPTFE
Corestranded
RelatedRG-196

This product was added to our catalog on Sunday 20 March, 2016.
Reviews

Copyright © 2018 CD International Technology